LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 94 (HVAC System - Manual) >> Repair Instructions >> HVAC Control Assembly Replacement - Rear Auxiliary

HVAC Control Assembly Replacement - Rear Auxiliary

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2007 GMC Yukon XL, 2007 GMC Yukon, 2007 Chevrolet Tahoe, 2007 Chevrolet Suburban, and 2007 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: View Of Rear HVAC Control Module & Screws
GM1711510Courtesy of GENERAL MOTORS CORP.
HVAC Control Assembly Replacement - Rear Auxiliary

Callout Component Name

Preliminary Procedure

  1. Remove the overhead console - rear. Refer to Overhead Console Replacement - Rear (w/o DVD) or Overhead Console Replacement - Rear (with DVD) .
  2. Disconnect the rear HVAC control module electrical connector.
1 Screws, Rear HVAC Control Module (Qty: 4)
NOTE: Refer to Fastener Notice .

Tighten:  1.5 N.m (13 lb in)

2 Rear HVAC Control Module
Tip:  HVAC Control Module must be reprogrammed. Refer to Control Module References .