LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 93 (Instrument Panel System Displays And Gauges) >> Diagnostic Information and Procedures >> Scan Tool Output Controls

Scan Tool Output Controls

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2007 GMC Yukon XL, 2007 GMC Yukon, 2007 Chevrolet Tahoe, 2007 Chevrolet Suburban, and 2007 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Instrument Panel Cluster (IPC)

Scan Tool Output Control Additional Menu Selections Description
IPC Gages Special Functions The instrument panel cluster (IPC) drives all of the gages at or below minimum for a few seconds when you select ON, then drives all of the gages at or above maximum for a few seconds. The IPC Display Test will end after one cycle of the gages sweep.
Display Test Special Functions The IPC illuminates all of the indicators for 7 seconds when you select ON. The IPC turns off the indicators after the 7 seconds.
Dimming Special Functions The IPC increases or decreases the dimming intensity in increments of 20 percent between a range of 0-100 percent.
scientia non olet · About LEMON Manuals