LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 93 (Instrument Panel System Displays And Gauges) >> Diagnostic Information and Procedures >> Instrument Cluster Inoperative >> Circuit/System Testing

Circuit/System Testing

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2007 GMC Yukon XL, 2007 GMC Yukon, 2007 Chevrolet Tahoe, 2007 Chevrolet Suburban, and 2007 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition OFF, disconnect the IPC.
  2. Ignition ON, verify that a test lamp illuminates between the ignition 1 voltage circuit and a ground.
    • If the test lamp does not illuminate, repair the ignition 1 voltage circuit for a short to ground or an open/high resistance.
  3. Verify that a test lamp illuminates between the ignition 1 voltage circuit and the IPC ground circuit.
    • If the test lamp does not illuminate, repair the IPC ground circuit for an open/high resistance.
  4. If all circuits test normal, replace the IPC
scientia non olet · About LEMON Manuals