LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 93 (Instrument Panel System Displays And Gauges) >> Diagnostic Information and Procedures >> Change Engine Oil Indicator Always On >> Circuit/System Description

Circuit/System Description

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2007 GMC Yukon XL, 2007 GMC Yukon, 2007 Chevrolet Tahoe, 2007 Chevrolet Suburban, and 2007 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

The engine control module (ECM) determines when the engine oil should be changed and calculates the oil life in percent. The ECM sends this information via high speed GMLAN to the body control module (BCM). The instrument panel cluster (IPC) receives this information from the BCM through low speed GMLAN and illuminates the oil level percent in the driver information center (DIC). The IPC will illuminate the CHANGE ENGINE OIL message when the oil needs to be changed.

scientia non olet · About LEMON Manuals