LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 92 (Heating, Ventilation, And Air Conditioning) >> Repair Instructions >> Expansion (Orifice) Tube Replacement (W/O C69)

Expansion (Orifice) Tube Replacement (W/O C69)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2007 GMC Yukon XL, 2007 GMC Yukon, 2007 Chevrolet Tahoe, 2007 Chevrolet Suburban, and 2007 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: View Of Orifice Tube Assembly & Components
GM1772203Courtesy of GENERAL MOTORS CORP.
Expansion (Orifice) Tube Replacement (W/O C69)

Callout Component Name

Preliminary Procedure

  1. Recover the refrigerant. Refer to Refrigerant Recovery and Recharging .
  2. Remove the air cleaner outlet duct. Refer to Air Cleaner Resonator Outlet Duct Replacement .
  3. Remove the air cleaner assembly. Refer to Air Cleaner Assembly Replacement .
1 Fitting, Orifice Tube
NOTE: Refer to Fastener Notice .

Tighten:  9 N.m (80 lb in)


Tip:  Loosen orifice tub fitting and separate the pressure line to access the orifice.
2 Seal, O-ring
Tip:  Remove and discard O-ring. Refer to O-Ring Replacement .
3 Orifice Tube Assembly
Tip:  Use J 26549-E  to remove orifice tube. See Special Tools .