LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 92 (Heating, Ventilation, And Air Conditioning) >> Repair Instructions >> Compressor Mounting Bracket Replacement >> Installation Procedure

Installation Procedure

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2007 GMC Yukon XL, 2007 GMC Yukon, 2007 Chevrolet Tahoe, 2007 Chevrolet Suburban, and 2007 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: A/C Compressor Bracket Mounting Bolts
    GM363185Courtesy of GENERAL MOTORS CORP.
  1. Install the A/C compressor bracket.
    2. NOTE: Refer to Fastener Notice .
  2. Install the A/C compressor bracket mounting bolts.

    Tighten:  Tighten the bolts to 50 N.m (37 lb ft).

  3. Install the A/C belt tensioner.
  4. Install the A/C belt tensioner bolts.

    Tighten:  Tighten the bolts to 50 N.m (37 lb ft).

  5. Install the A/C compressor. Refer to Compressor Replacement .
scientia non olet · About LEMON Manuals