LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 92 (Heating, Ventilation, And Air Conditioning) >> Repair Instructions >> Auxiliary Heater and Air Conditioning Pipe Repair >> Tools Required >> Minimum Tube Length Required Table

Minimum Tube Length Required Table

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2007 GMC Yukon XL, 2007 GMC Yukon, 2007 Chevrolet Tahoe, 2007 Chevrolet Suburban, and 2007 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT: When you section the rear A/C or heater lines, ensure that the correct minimum length remains in the straight part of the line on both sides of the splice.

Follow the Straight Line Repair procedure in order to repair line damage in a straight section of line.

Follow the Line Sectioning Repair procedure in order to repair any damage in a bend area. Do not repair the rear A/C or heater lines in a bend area, replace the lines. Maintaining the original line shape will prevent vibrations and rub-through.

Auxiliary Heater and Air Conditioning Pipe Repair

Tube Size Dim A Standard Installation Dim A Jaw Reversed Installation
8 mm (5/16 in) 29 mm (1 1/8 in) MIN 19-29 mm (3/4-1 1/8 in)
10 mm (3/8 in) 29 mm (1 1/8 in) MIN 19-29 mm (3/4-1 1/8 in)
13 mm (1/2 in) 29 mm (1 1/8 in) MIN 19-29 mm (3/4-1 1/8 in)
16 mm (5/8 in) 32 mm (1 1/4 in) MIN 23-32 mm (7/8-1 1/4 in)
19 mm (3/4 in) 34 mm (1 5/16 in) MIN 23-34 mm (7/8-1 5/16 in)