LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 92 (Heating, Ventilation, And Air Conditioning) >> Repair Instructions >> Auxiliary Blower Motor Replacement (Tahoe/Yukon/Denali/Escalade)

Auxiliary Blower Motor Replacement (Tahoe/Yukon/Denali/Escalade)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2007 GMC Yukon XL, 2007 GMC Yukon, 2007 Chevrolet Tahoe, 2007 Chevrolet Suburban, and 2007 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: View Of Blower Motor Assembly
GM1689365Courtesy of GENERAL MOTORS CORP.
Auxiliary Blower Motor Replacement (Tahoe/Yukon/Denali/Escalade)

Callout Component Name

Preliminary Procedure

  1. Remove the right rear quarter trim panel. Refer to Trim Panel Replacement - Rear Quarter - Right (Extended Wheelbase) or Trim Panel Replacement - Rear Quarter - Right (Standard Wheelbase) .
  2. Disconnect the blower motor electrical connector.
  3. Tip: 

    Remove one attaching screw securing blower motor if applicable

1 Carefully pull back locking tabs on blower motor assembly. (Qty: 2)
2 Rotate blower motor assembly counterclockwise.
3 Motor, Blower Assembly