LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 92 (Heating, Ventilation, And Air Conditioning) >> Diagnostic Information and Procedures >> Leak Testing >> Refrigerant Leak Testing

Refrigerant Leak Testing

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2007 GMC Yukon XL, 2007 GMC Yukon, 2007 Chevrolet Tahoe, 2007 Chevrolet Suburban, and 2007 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Tools Required

IMPORTANT: General Motors vehicles are now manufactured with fluorescent dye installed directly into the A/C system.

The preferred method of leak testing is with the use of fluorescent dye. J 41447  is the only fluorescent dye approved by General Motors. See Special Tools .

The fluorescent dye mixes and flows with the PAG oil throughout the refrigerant system.

Verifying some passive leaks may require using the J 39400-A  , even though the A/C system contains fluorescent dye. See Special Tools .

The only time that adding additional fluorescent dye is required is after flushing the A/C system.