Installation Procedure

WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Spare Tire Carrier Frame & License Plate Pocket

Courtesy of GENERAL MOTORS CORP.

Install the license plate pocket (3) to the spare tire carrier frame (2).

Fig 2: Hand Nut & Spare Tire Carrier Frame

Courtesy of GENERAL MOTORS CORP.

Secure the nut (1) to the license plate pocket bolts. Hand-tighten the nut.
Latch and secure the spare tire carrier.