LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 9 (Exterior Trim) >> Repair Instructions >> Liftgate Applique Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
  1. Open the liftgate.
  2. Remove the high mounted stop lamp. Refer to High Mounted Stop Lamp Replacement (SUT) or High Mounted Stop Lamp Replacement (SUV) .
    3. Fig 1: Liftgate Applique
    GM880552Courtesy of GENERAL MOTORS CORP.
  3. Remove all the fasteners (1,2) retaining the applique to the liftgate.
  4. Remove the liftgate applique from the liftgate.
scientia non olet · About LEMON Manuals