Installation Procedure

WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Hood Air Grille

Courtesy of GENERAL MOTORS CORP.

Align the hood air grille (1) to the hood.

NOTE: Refer to Fastener Notice .

Install the nuts (2) retaining the grille to the hood.
Tighten: Tighten the nuts to 9 N.m (7 lb ft).
Install the hood insulator. Refer to Hood Insulator Replacement .
Close the hood.