LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 9 (Exterior Trim) >> Repair Instructions >> Grille Guard/Brush Guard Replacement (Base) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Grille & Brush Guard
    GM824708Courtesy of GENERAL MOTORS CORP.
  1. Remove the lower grille. Refer to Lower Grille Replacement .
  2. Remove the bolt from the pencil brace at the hood support, if equipped.
  3. Remove the bolts retaining the brush guard to the vehicle.
  4. Remove the brush guard from the vehicle.
scientia non olet · About LEMON Manuals