LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 9 (Exterior Trim) >> Repair Instructions >> Cargo Box Side Rail Protector Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
  1. Open the spare tire carrier to the full open position.
  2. Open the endgate.
    3. Fig 1: Bed Rail Protector
    GM1412539Courtesy of GENERAL MOTORS CORP.
  3. Release the plastic retainer at the endgate side of the bed rail protector.
  4. Remove the screws securing the cargo box rail to the body.
  5. Remove the bed rail.
  6. Release the retainer clips.
  7. Lift and remove the cargo box rail protector.
scientia non olet · About LEMON Manuals