LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 9 (Exterior Trim) >> Repair Instructions >> Cargo Box Rail Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the 4 screws from the cargo box top rail.
  2. Remove the rail from the cargo box protector.
  3. Assembly clips may be holding the rail to the alignment pins. Gently pry upward in order to remove.
scientia non olet · About LEMON Manuals