LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 9 (Exterior Trim) >> Repair Instructions >> Cargo Box Rail Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the screws into the cargo box rail.
  2. Position the cargo box rail to the cargo box protector.
    3. NOTE: Refer to Fastener Notice .
  3. Align the screws.

    Tighten:  Tighten the screws to 10 N.m (89 lb in).

scientia non olet · About LEMON Manuals