LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 89 (Frame And Underbody) >> Repair Instructions >> Wheelhouse Liner Panel Replacement - Rear

Wheelhouse Liner Panel Replacement - Rear

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2007 GMC Yukon XL, 2007 GMC Yukon, 2007 Chevrolet Tahoe, 2007 Chevrolet Suburban, and 2007 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: View Of Rear Wheelhouse Liner, Screws & Retainers
GM1696894Courtesy of GENERAL MOTORS CORP.
Wheelhouse Liner Panel Replacement - Rear

Callout Component Name
Preliminary Procedure: 
Remove the appropriate tire and wheel assembly. Refer to Tire and Wheel Removal and Installation .
1 Rear Wheelhouse Liner Retainer (Qty: 3)
2 Rear Wheelhouse Liner Screw (Qty: 7)
NOTE: Refer to Fastener Notice .

Tighten:  9 N.m (80 lb in)

3 Rear Wheelhouse Liner
Tip:  Before attempting to remove the wheelhouse liner remove any plastic retainers and/or bolts passing through or attached to the wheelhouse liner.