LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 87 (Bumper System & Fascia) >> Repair Instructions >> Rear Bumper Fascia Trailer Hitch Access Hole Cover Replacement

Rear Bumper Fascia Trailer Hitch Access Hole Cover Replacement

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2007 GMC Yukon XL, 2007 GMC Yukon, 2007 Chevrolet Tahoe, 2007 Chevrolet Suburban, and 2007 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: View Of Rear Bumper Fascia Trailer Hitch Access Hole Cover & Locking Screws
GM1823562Courtesy of GENERAL MOTORS CORP.
Rear Bumper Fascia Trailer Hitch Access Hole Cover Replacement

Callout Component Name
1 Locking Screws (Qty: 2)
2 Rear Bumper Fascia Trailer Hitch Accessory Hole Cover
Tip:  Pull the bottom outward first then pull downward to remove the cover from the fascia.