LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 87 (Bumper System & Fascia) >> Repair Instructions >> Front Bumper Fascia Skid Plate (Z71)

Front Bumper Fascia Skid Plate (Z71)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2007 GMC Yukon XL, 2007 GMC Yukon, 2007 Chevrolet Tahoe, 2007 Chevrolet Suburban, and 2007 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: View Of Front Bumper Skid Plate & Screws
GM1714798Courtesy of GENERAL MOTORS CORP.
Front Bumper Fascia Skid Plate (Z71)

Callout Component Name
Preliminary Procedure: 
Remove the front fascia. Refer to Fascia Replacement - Front Bumper - Lower (Z71) .
1 Front Bumper Skid Plate Screws (Qty: 8)
NOTE: Refer to Fastener Notice .

Tighten:  2 N.m (18 lb in)

2 Front Bumper Skid Plate