LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 86 (Bolted Exterior Body Panels And Closures) >> Repair Instructions >> Weatherstrip Replacement - Front Door Opening >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2007 GMC Yukon XL, 2007 GMC Yukon, 2007 Chevrolet Tahoe, 2007 Chevrolet Suburban, and 2007 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the front door sill plate. Refer to Front Side Door Sill Plate Replacement in Interior Trim.
    2. Fig 1: Identifying Pinch-Weld Flange Weatherstrip (Front Door Opening)
    GM686582Courtesy of GENERAL MOTORS CORP.
  2. Remove the weatherstrip from the pinch-weld flange.
scientia non olet · About LEMON Manuals