Panel Replacement - Cargo Box Bridge Side Inner (Avalanche)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2007 GMC Yukon XL, 2007 GMC Yukon, 2007 Chevrolet Tahoe, 2007 Chevrolet Suburban, and 2007 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Cargo Box Bridge Side Inner Panel Assembly & Screws

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedures Remove rear compartment cover assembly. Refer to Cargo Box Front Cover, Center Cover, and Rear Cover Replacement . Remove cargo box bridge center panel. Refer to Panel Replacement - Cargo Box Bridge Center (Avalanche) or Panel Replacement - Cargo Box Bridge Center (Escalade EXT) .
1	Cargo Box Bridge Side Inner Panel Screw (Qty: 4) Tip: Use a flat-bladed tool to release retainers.
2	Cargo Box Bridge Side Inner Panel Assembly

Callout

Component Name

Preliminary Procedures

Remove rear compartment cover assembly. Refer to Cargo Box Front Cover, Center Cover, and Rear Cover Replacement .
Remove cargo box bridge center panel. Refer to Panel Replacement - Cargo Box Bridge Center (Avalanche) or Panel Replacement - Cargo Box Bridge Center (Escalade EXT) .

Cargo Box Bridge Side Inner Panel Screw (Qty: 4)
Tip: Use a flat-bladed tool to release retainers.

Cargo Box Bridge Side Inner Panel Assembly