LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 86 (Bolted Exterior Body Panels And Closures) >> Repair Instructions >> Liftgate Strut Ball Stud Replacement

Liftgate Strut Ball Stud Replacement

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2007 GMC Yukon XL, 2007 GMC Yukon, 2007 Chevrolet Tahoe, 2007 Chevrolet Suburban, and 2007 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: View Of Liftgate Strut Ball Stud
GM1687287Courtesy of GENERAL MOTORS CORP.
Liftgate Strut Ball Stud Replacement

Callout Component Name
CAUTION: When a lift gate hold open device is being removed or installed, provide alternate support to avoid the possibility of damage to the vehicle or personal injury.
1 Liftgate Strut Ball Stud
NOTE: Refer to Fastener Notice .

Tighten:  9 N.m (80 lb in)


Tip:  Disconnect the strut support rod from the ball stud before removal.