LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 86 (Bolted Exterior Body Panels And Closures) >> Repair Instructions >> Lift Gate Weatherstrip Replacement

Lift Gate Weatherstrip Replacement

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2007 GMC Yukon XL, 2007 GMC Yukon, 2007 Chevrolet Tahoe, 2007 Chevrolet Suburban, and 2007 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: View Of Lift Gate Weatherstrip
GM1684634Courtesy of GENERAL MOTORS CORP.
Lift Gate Weatherstrip Replacement

Callout Component Name
Preliminary Procedure: 
Remove the liftgate sill plate. Refer to Door Sill Plate Replacement - Liftgate .
1 Liftgate Weatherstrip
Tip:  Locate the paint dot on the upper portion of the weatherstrip directly below the electrical pass through. Roll the weatherstrip from the center to the upper corners. Roll the weather strip from the upper corners to the lower corners. Roll the weatherstrip from the lower corners to the center.