LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 86 (Bolted Exterior Body Panels And Closures) >> Repair Instructions >> Endgate Weatherstrip Replacement

Endgate Weatherstrip Replacement

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2007 GMC Yukon XL, 2007 GMC Yukon, 2007 Chevrolet Tahoe, 2007 Chevrolet Suburban, and 2007 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: View Of Endgate Weatherstrip
GM1817768Courtesy of GENERAL MOTORS CORP.
Endgate Weatherstrip Replacement

Callout Component Name
1 Endgate Weatherstrip
Tip: 
  1. Seat and align the weatherstrip carrier end left to top of flange left side.
  2. Seat and align the weatherstrip carrier end right to top of flange right side.
  3. Load the weatherstrip center flush with the center of the flange.
  4. Stuff and set remaining weatherstrip working downward and inward toward the center.