LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 86 (Bolted Exterior Body Panels And Closures) >> Repair Instructions >> Box Replacement - Cargo Stowage >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2007 GMC Yukon XL, 2007 GMC Yukon, 2007 Chevrolet Tahoe, 2007 Chevrolet Suburban, and 2007 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the rear compartment cover assembly. Refer to Cargo Box Front Cover, Center Cover, and Rear Cover Replacement .
  2. Remove the assist handle. Refer to Assist Handle Replacement - Endgate (Avalanche) .
  3. Remove the cargo box stowage lid assembly. Refer to Lid Replacement - Cargo Box Stowage Box .
    4. Fig 1: View Of Body Side Inner Panel Bolts & Cargo Box Stowage Box
    GM1708945Courtesy of GENERAL MOTORS CORP.
  4. Remove the lamp socket from the pickup box side courtesy lamp.
  5. Remove the cargo tie-down bolts and tie rings from the body side inner panel.
  6. Remove the cargo box stowage box (2) from the vehicle.
scientia non olet · About LEMON Manuals