LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 85 (Wiper System & Washer System) >> Repair Instructions >> Washer Pump Replacement - Windshield

Washer Pump Replacement - Windshield

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2007 GMC Yukon XL, 2007 GMC Yukon, 2007 Chevrolet Tahoe, 2007 Chevrolet Suburban, and 2007 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: View Of Windshield Washer Solvent Pump & Grommet
GM1685045Courtesy of GENERAL MOTORS CORP.
Washer Pump Replacement - Windshield

Callout Component Name

Preliminary Procedures

  1. Remove the windshield washer container. Refer to Washer Solvent Container Replacement (Chevrolet/GMC) .
  2. Using 2 flat-bladed tools, gently pry the windshield washer solvent pump from the front side of the washer container.
  3. Discard the old windshield washer solvent pump grommet.
1 Windshield Washer Solvent Pump
2 Windshield Washer Solvent Pump Grommet
Tip:  Discard the old grommet and use the new grommet in the kit.