LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 82 (Lighting Systems) >> Repair Instructions >> Park/Turn Signal Lamp Bulb Replacement (Escalade )

Park/Turn Signal Lamp Bulb Replacement (Escalade )

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2007 GMC Yukon XL, 2007 GMC Yukon, 2007 Chevrolet Tahoe, 2007 Chevrolet Suburban, and 2007 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: View Of Turn Signal Lamp Bulb & Socket
GM1767117Courtesy of GENERAL MOTORS CORP.
Park/Turn Signal Lamp Bulb Replacement (Escalade )

Callout Component Name

Preliminary Procedures

  1. Remove the front lower bumper filler from the side the bulb is being serviced from. Refer to Bumper Filler Replacement - Front Side (All Utility, Avalanche, Cadillac EXT) or Bumper Filler Replacement - Front Side (Z71) .
  2. Rotate the bulb socket counterclockwise in order to remove.
1 Front Park, Turn Signal Lamp Socket
2 Front Park, Turn Signal Lamp Bulb
Tip:  Pull the bulb straight from the socket.