LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 82 (Lighting Systems) >> Repair Instructions >> High Intensity Discharge Headlamp Ballast Replacement

High Intensity Discharge Headlamp Ballast Replacement

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2007 GMC Yukon XL, 2007 GMC Yukon, 2007 Chevrolet Tahoe, 2007 Chevrolet Suburban, and 2007 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: View Of Headlamp Ballast Assembly & Screws
GM1705687Courtesy of GENERAL MOTORS CORP.
High Intensity Discharge Headlamp Ballast Replacement

Callout Component Name
Preliminary Procedure: 
Remove the headlamp. Refer to Headlamp Replacement (Non HID)  or Headlamp Replacement (Yukon)  or Headlamp Replacement (Tahoe, Avalanche)  or Headlamp Replacement (Cadillac Escalade) .
1 Headlamp Ballast Assembly Screws (Qty: 3)
NOTE: Refer to Fastener Notice .

Tighten:  2 N.m (18 lb in)

2 Headlamp Ballast Assembly