LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 82 (Lighting Systems) >> Diagnostic Information and Procedures >> DTC B257A >> Circuit/System Description

Circuit/System Description

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2007 GMC Yukon XL, 2007 GMC Yukon, 2007 Chevrolet Tahoe, 2007 Chevrolet Suburban, and 2007 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

When the headlamp switch is in the AUTO position, the body control module (BCM) receives a ground signal through the headlamp switch headlamps OFF signal circuit and no signal on the headlamp switch headlamp ON signal circuit and headlamp switch park lamps ON signal circuit. When the headlamp switch is in the PARK or HEAD position, the BCM receives no signal through the headlamp switch headlamps OFF signal circuit and a ground signal through the headlamp switch headlamp ON signal circuit and headlamp switch park lamps ON signal circuit.