Run Up of the HID Lamp
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2007 GMC Yukon XL, 2007 GMC Yukon, 2007 Chevrolet Tahoe, 2007 Chevrolet Suburban, and 2007 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
After the lamp receives the strike from the starter and the arc is established, the ballast uses its -360-volt output in order to provide the run up power needed in order to keep the lamp ON. The lamp rapidly increases in intensity from a dim glow to a very high-intensity, bright light called a steady state. Within 2 seconds of the arc being established in the bulb, 70 percent of steady state is complete. 100 percent of the steady state is completed within 30 seconds. A 75-watt power level is necessary in order to bring the lamp to a steady state in the required period of time.