LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 82 (Lighting Systems) >> Description and Operation >> Exterior Lighting Systems Description and Operation >> Exterior Lamps >> Activating and Enabling IntelliBeam

Activating and Enabling IntelliBeam

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2007 GMC Yukon XL, 2007 GMC Yukon, 2007 Chevrolet Tahoe, 2007 Chevrolet Suburban, and 2007 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Press and release the IntelliBeam button on the inside rearview mirror. The IntelliBeam indicator on the mirror will illuminate to indicate the system has been turned ON. Once the systems has been turned ON, it will remain ON each time the vehicle is started. Additionally, the IntelliBeam system must be enabled. To enable the IntelliBeam system, turn the exterior lamp control to AUTO, with the turn signal/multifunction lever in its neutral position. The high beam ON light will appear on the instrument panel cluster when the high beams are ON.

scientia non olet · About LEMON Manuals