Removal Procedure

WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Tubular Tail Lamp Guard Screws

Courtesy of GENERAL MOTORS CORP.

Open the liftgate.

Fig 2: Adhesive Strip To Body

Courtesy of GENERAL MOTORS CORP.

Remove the screws retaining the tail lamp guard.

Fig 3: Tubular Tail Lamp Guard

Courtesy of GENERAL MOTORS CORP.

Carefully separate adhesive strip from body.
Remove the tail lamp guard from the vehicle.