LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 8 (Lighting) >> Repair Instructions >> Overhead Console Reading Lamp and Bulb Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Reading Lamp Lens
    GM827787Courtesy of GENERAL MOTORS CORP.
  1. Use a flat bladed tool and pop the reading lamp lens from the forward console.
  2. Turn the bulb 1/4 turn and remove the bulb from the reading lamp socket.
  3. Fig 2: Fastening Overhead Console To Headliner
    GM827786Courtesy of GENERAL MOTORS CORP.
  4. Remove the overhead console.
  5. Fig 3: Connecting Individual Connectors To Garage Door Module
    GM827784Courtesy of GENERAL MOTORS CORP.
  6. Disconnect the electrical connector from the reading lamp.
  7. Fig 4: Lamp Socket Assembly
    GM827779Courtesy of GENERAL MOTORS CORP.
  8. Remove the lamp socket assembly from the overhead console.