LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 8 (Lighting) >> Repair Instructions >> Headlamp Switch Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: I/P Accessory Left Trim Panel
    GM816356Courtesy of GENERAL MOTORS CORP.
  1. Remove the instrument panel trim plate. Refer to Instrument Panel Accessory Trim Plate Replacement - Left Side .
  2. Fig 2: Headlamp Switch
    GM815923Courtesy of GENERAL MOTORS CORP.
  3. Pull out the headlamp switch in order to release the clips.
  4. Remove the headlamp switch.
  5. Fig 3: Electrical Connector
    GM832807Courtesy of GENERAL MOTORS CORP.
  6. Disconnect the electrical connector.