LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 8 (Lighting) >> Repair Instructions >> Headlamp Switch Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Electrical Connector
    GM832807Courtesy of GENERAL MOTORS CORP.
  1. Connect the electrical connectors to the headlamp switch.
    2. Fig 2: Headlamp Switch
    GM815923Courtesy of GENERAL MOTORS CORP.
  2. Align and install the headlamp switch to the instrument panel.
    3. Fig 3: I/P Accessory Left Trim Panel
    GM816356Courtesy of GENERAL MOTORS CORP.
  3. Install the instrument panel trim plate. Refer to Instrument Panel Accessory Trim Plate Replacement - Left Side .
scientia non olet · About LEMON Manuals