LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 8 (Lighting) >> Repair Instructions >> Daytime Running Lamp Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Daytime Running Lamp
    GM802876Courtesy of GENERAL MOTORS CORP.
  1. Disconnect the electrical connector.
  2. Remove the nuts from the rear of the lamp assembly.
  3. Disengage the clips retaining lamp.
  4. Remove the lamp assembly.
  5. Remove the bulb socket by turning the socket counterclockwise.
  6. Remove the bulb.
scientia non olet · About LEMON Manuals