Installation Procedure

WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Clearance Lamp Bulb (SUV)

Courtesy of GENERAL MOTORS CORP.

Install the bulb to the socket.
Install the socket to the lamp housing.
Ensure the lamp housing foam seal is not damaged.
Install the lamp assembly to the roof luggage carrier side rail end cap.

NOTE: Refer to Fastener Notice .

Install the screw to the lamp assembly.
Tighten: Tighten the screw to 2.5 N.m (22 lb in).