Removal Procedure

WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Upper Trim Pad

Courtesy of GENERAL MOTORS CORP.

Remove the instrument panel top cover. Refer to Instrument Panel Upper Trim Pad Replacement .

Fig 2: Aligning I/P & Routing Electrical Harnesses

Courtesy of GENERAL MOTORS CORP.

Disconnect the electrical connector to the ambient light sensor on the underside of the I/P upper trim panel.

Fig 3: Ambient Light Sensor & I/P Top Cover

Courtesy of GENERAL MOTORS CORP.

Turn the ambient light sensor 1/4 turn and remove it from the I/P top cover.