Accident With Side Air Bag Deployment - Component Replacement and Inspections
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2007 GMC Yukon XL, 2007 GMC Yukon, 2007 Chevrolet Tahoe, 2007 Chevrolet Suburban, and 2007 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
After a collision involving side air bag deployment, replace the following components:
- Inflatable restraint roof rail module, on the side of the impact.
- Inflatable restraint side impact sensors (SIS) (front/rear), on the side of the impact
- Inflatable restraint SDM
- Seat belt pretensioner, on the side of impact.
Perform additional inspections on the following components:
- Mounting points or mounting hardware for the SIS, roof rail module (left/right), and seat belt pretensioner on the side of impact-Inspect for any damage and repair or replace each component as needed.
- Mounting points or mounting hardware for the SDM and vehicle rollover sensor-Inspect for any damage and repair or replace each component as needed.