Garnish Molding Replacement - Rear Upper (Avalanche/Escalade EXT)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2007 GMC Yukon XL, 2007 GMC Yukon, 2007 Chevrolet Tahoe, 2007 Chevrolet Suburban, and 2007 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Headliner Trim Panel Molding Assembly & Retainers

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedures Remove rear window from the vehicle. Remove body lock pillar garnish molding. Refer to Body Lock Pillar Garnish Molding Replacement (Avalanche/Escalade EXT) or Body Lock Pillar Garnish Molding Replacement (Suburban/Yukon XL/Escalade ESV) or Body Lock Pillar Garnish Molding Replacement (Tahoe/Yukon/Escalade) .
1	Headliner Trim Panel Molding Retainer (Qty: 7)
2	Headliner Trim Panel Molding Assembly Tip: Disconnect electrical connector.

Callout

Component Name

Preliminary Procedures

Remove rear window from the vehicle.
Remove body lock pillar garnish molding. Refer to Body Lock Pillar Garnish Molding Replacement (Avalanche/Escalade EXT) or Body Lock Pillar Garnish Molding Replacement (Suburban/Yukon XL/Escalade ESV) or Body Lock Pillar Garnish Molding Replacement (Tahoe/Yukon/Escalade) .

Headliner Trim Panel Molding Retainer (Qty: 7)

Headliner Trim Panel Molding Assembly
Tip: Disconnect electrical connector.