Shoulder Belt Guide Adjuster Replacement - Front

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2007 GMC Yukon XL, 2007 GMC Yukon, 2007 Chevrolet Tahoe, 2007 Chevrolet Suburban, and 2007 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Shoulder Belt Guide Adjuster Assembly & Bolts

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
NOTE: Refer to Fastener Notice . Fastener Tightening Specifications: Refer to Fastener Tightening Specifications . Preliminary Procedure Remove front door sill plate. Refer to Front Side Door Sill Plate Replacement . Remove rear door sill plate. Refer to Rear Side Door Sill Plate Replacement (Extended Wheelbase) or Rear Side Door Sill Plate Replacement (Standard Wheelbase) . Remove front seat shoulder belt adjuster cover. Refer to Seat Belt Height Adjuster Knob Replacement - Front . Remove center pillar lower garnish molding. Refer to Garnish Molding Replacement - Center Pillar Lower . Remover center pillar upper garnish molding. Refer to Garnish Molding Replacement - Center Pillar Upper . Remove front seat belt. Refer to Seat Belt Retractor Pretensioner Replacement - Front .
1	Front Seat Shoulder Belt Guide Adjuster Bolt (Qty: 2) Tighten: 50 N.m (37 lb ft)
2	Front Seat Shoulder Belt Guide Adjuster Assembly

Callout

Component Name

NOTE: Refer to Fastener Notice .

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

Preliminary Procedure

Remove front door sill plate. Refer to Front Side Door Sill Plate Replacement .
Remove rear door sill plate. Refer to Rear Side Door Sill Plate Replacement (Extended Wheelbase) or Rear Side Door Sill Plate Replacement (Standard Wheelbase) .
Remove front seat shoulder belt adjuster cover. Refer to Seat Belt Height Adjuster Knob Replacement - Front .
Remove center pillar lower garnish molding. Refer to Garnish Molding Replacement - Center Pillar Lower .
Remover center pillar upper garnish molding. Refer to Garnish Molding Replacement - Center Pillar Upper .
Remove front seat belt. Refer to Seat Belt Retractor Pretensioner Replacement - Front .

Front Seat Shoulder Belt Guide Adjuster Bolt (Qty: 2)

Tighten: 50 N.m (37 lb ft)

Front Seat Shoulder Belt Guide Adjuster Assembly