LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 75 (Seat Hardware, Seat Trim, And Upholstery) >> Repair Instructions >> Seat Replacement - Center

Seat Replacement - Center

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2007 GMC Yukon XL, 2007 GMC Yukon, 2007 Chevrolet Tahoe, 2007 Chevrolet Suburban, and 2007 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Front Seat Assembly & Components
GM1683832Courtesy of GENERAL MOTORS CORP.
Seat Replacement - Center

Callout Component Name

Preliminary Procedure

  1. Remove the front seat adjuster covers. Refer to Front Seat Adjuster Track Finish Cover Replacement .
  2. Disconnect the seat belt from the seat. Refer to Seat Belt Retractor Pretensioner Replacement - Front .
1 Front Seat Assembly Nut (Qty: 4)
Tip:  Adjust the seat rearward to access the nuts.
NOTE: Refer to Fastener Notice .

Tighten:  45 N.m (33 lb ft)
2 Front Seat Assembly Bolt (Qty: 4)
Tip:  Adjust the seat forward to access the bolts.

Tighten:  45 N.m (33 lb ft)
3 Front Seat Assembly (Qty: 2)
Tip:  Disconnect the electrical connector.
4 Front Center Seat Assembly
scientia non olet · About LEMON Manuals