Rear Seat Number 2 Riser Latch Assembly Replacement

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2007 GMC Yukon XL, 2007 GMC Yukon, 2007 Chevrolet Tahoe, 2007 Chevrolet Suburban, and 2007 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Rear Seat No. 2 Riser Latch Assembly Components

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
NOTE: Refer to Fastener Notice . Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .Preliminary Procedure: Remove the rear seat. Refer to Rear Number 2 Seat Replacement (Suburban/Yukon XL) or Rear Number 2 Seat Replacement (Tahoe/Yukon/Escalade) .
1	Rear Seat Hinge Finish Cover
2	Rear Seat Cushion Trim Panel
3	Rear Seat Latch Trim Cover
4	Rear Seat #2 Load Floor Latch Bolt (Qty: 4) Tighten: 9 N.m (80 lb in)
5	Rear Seat #2 Load Floor Latch