LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 75 (Seat Hardware, Seat Trim, And Upholstery) >> Repair Instructions >> Head Restraint Guide Replacement

Head Restraint Guide Replacement

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2007 GMC Yukon XL, 2007 GMC Yukon, 2007 Chevrolet Tahoe, 2007 Chevrolet Suburban, and 2007 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: View Of Front Seat Head Restraint Assembly & Components
GM1678363Courtesy of GENERAL MOTORS CORP.
Head Restraint Guide Replacement

Callout Component Name
1 Front Seat Back Cushion Finish Panel
Tip:  Using a nylon flat-bladed tool, push the tabs in on the side of the panel to release from the seat back to remove.
2 Front Seat Head Restraint Assembly
Tip: 
  1. Depress the button on the inboard head restraint guide to raise the head restraint to the full up position.
  2. Insert a small diameter tool into the hole on the inboard side of the outboard head restraint guide and pull upward to remove.
3 Front Seat Head Restraint Guide (Qty: 2)
Tip:  Squeeze the bottom of the guide together and push up to remove from the seat back.
scientia non olet · About LEMON Manuals