LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 7 (Tires And Wheels) >> Repair Instructions >> Spare Tire Carrier Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Opening & Closing Spare Tire Carrier
    GM1504084Courtesy of GENERAL MOTORS CORP.
  1. Unlatch and open the spare tire carrier swing arm.
  2. Fig 2: Spare Tire Components
    GM1455913Courtesy of GENERAL MOTORS CORP.
  3. Remove the spare tire stowage cover nut (1).
  4. Remove the spare tire cover (2).
  5. Fig 3: Removing Or Installing Spare Tire
    GM1455916Courtesy of GENERAL MOTORS CORP.
  6. Remove the spare tire mounting nuts.
  7. Remove the spare tire from the spare tire carrier.
  8. Fig 4: Spare Tire Carrier Assembly
    GM1455917Courtesy of GENERAL MOTORS CORP.
  9. Remove the spare tire carrier assembly, perform the following steps:
    1. Disconnect the license plate lamp harness electrical connector.
    2. Remove the spare tire carrier bolts.
    3. Remove the spare tire carrier assembly.