To Slide Open

WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.

The slide open function will work when the sunroof window is in the closed or partially open position. To slide open the power sunroof, press and hold the sunroof switch rearward. This will apply an input to the sunroof actuator motor from the sunroof switch open contacts through the sunroof switch open signal circuit. The constant input, allows the sunroof actuator motor to control the opening of the sunroof window. From the closed position the sunroof window will lower slightly, then slide open, rearward, with the sunroof sunshade between the roof and the headliner, stopping at the comfort stop position.

From the comfort stop position, an open request will slide the sunroof window approximately 2.54 cm (1 in) further open. The next open request will slide the sunroof window completely to the full open position.