LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 62 (Engine Mechanical) >> Repair Instructions >> On-Vehicle Repair Instructions >> Engine Mount Bracket Replacement - Left Side >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Engine Mount Bracket (Left)
    GM794680Courtesy of GENERAL MOTORS CORP.
  1. Remove the engine mount. Refer to Engine Mount Replacement - Left Side .
  2. Remove the engine mount bracket bolts.
  3. Remove the engine mount bracket.