Crankshaft Balancer Replacement: Notes

WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.

Tools Required

J 41478 Crankshaft Front Oil Seal Installer. See Special Tools .
J 41816 Crankshaft Balancer Remover
J 41816-2 Crankshaft End Protector
J 42386-A Flywheel Holding Tool
J 41665 Crankshaft Balancer and Sprocket Installer. See Special Tools .
J 45059 Angle Meter. See Special Tools .