Crankshaft and Bearings Cleaning and Inspection: Notes
WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
Tools Required
- J 6125-1B Slide Hammer. See Special Tools .
- J 7872 Magnetic Base Dial Indicator Set
- J 41818 Crankshaft Bearing Cap Remover
- J 43690 Rod Bearing Checking Tool. See Special Tools .
- J 43690-100 Rod Bearing Checking Tool - Adapter Kit. See Special Tools .
- J 45059 Angle Meter. See Special Tools .