LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 62 (Engine Mechanical) >> Repair Instructions >> Off-Vehicle Repair Instructions >> Crankshaft Rear Oil Seal Housing Removal

Crankshaft Rear Oil Seal Housing Removal

WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View of Rear Housing, Gasket and Seal
    GM1552544Courtesy of GENERAL MOTORS CORP.
  1. Remove the rear oil seal housing bolts (517).
  2. Remove the housing (518) and gasket (519).
  3. Remove the rear oil seal (141).